CAT 140 H Grader
Efficiently unleash cross-media information without cross-media value. Quickly maximize timely deliverables for real-time schemas. Dramatically maintain clicks-and-mortar solutions without functional solutions.
Product Description
3176 ENGINE, TIRES-1400R24 @20-45%, LIGHTS: CAB AND BAR MOUNTED, LIGHTS: WORK, LIGHT, WARNING, CAB MOUNTED, AIR CONDITIONER WITH HEATER, WINDOWS: LOWER OPENING, WIPER/WASHER, REAR, LP, FAN, DEFROSTER, FRONT WINDOW, FAN, DEFROSTER, REAR WINDOW, SPEEDOMETER/TACHOMETER, MIRRORS: OUTSIDE MOUNTED, RADIO READY: ENTERTAINMENT, ENGINE: TRIPLE HP SETTING, AIR DRYER, PUSH PLATE: COUNTERWEIGHT, ACCUMULATORS: BLADE LIFT, HEATER, ENGINE COOLANT, 120V, STARTING AID: ETHER, HYDRAULICS: BASE & 1 FUNCTION, BLADE: 14′ X 24″ X 7/8″, CUTTING EDGE: 14′ BLADE, RIPPER-SCARIFIER, AS IS/ AS RECEIVED, 0P0800/8500
|
Dimensions
|
||
| A. OVERALL LENGTH | 28.6 ft in | 8713 mm |
| B. WIDTH OVER TIRES | 8.1 ft in | 2464 mm |
| C. HEIGHT TO TOP OF CAB | 10.3 ft in | 3131 mm |
| D. WHEELBASE | 20.2 ft in | 6169 mm |
| E. REAR GROUND CLEARANCE | 1.1 ft in | 344 mm |
| F. FRONT GROUND CLEARANCE | 2 ft in | 600 mm |
| G. TANDEM AXLE WHEELBASE | 5 ft in | 1523 mm |
| H. BLADE BASE | 8.4 ft in | 2561 mm |
Specification
| Engine | ||
| MAKE | Caterpillar | |
| MODEL | 3176C DITA ATAAC VHP | |
| NET POWER GEAR 1-2 | 165 hp | 123 kw |
| NET POWER GEAR 3-4 | 185 hp | 138 kw |
| POWER MEASURED @ | 2000 rpm | |
| NET POWER GEAR 5-6 | 185 hp | 138 kw |
| NUMBER OF CYLINDERS | 6 | |
| NET POWER GEARS 7-8 | 185 hp | 138 kw |
| MAX POWER | 185 hp | 138 kw |
| DISPLACEMENT | 629 cu in | 10.3 L |
| Operational | ||
| STD OPERATION WEIGHT – FRONT AXLE | 9123 lb | 4138 kg |
| STD OPERATION WEIGHT – REAR AXLE | 23234 lb | 10539 kg |
| STD OPERATION WEIGHT – TOTAL | 32357 lb | 14677 kg |
| MAX OPERATION WEIGHT – FRONT AXLE | 16733 lb | 7590 kg |
| MAX OPERATION WEIGHT – REAR AXLE | 30139 lb | 13671 kg |
| MAX OPERATION WEIGHT – TOTAL | 46872 lb | 21261 kg |
| FUEL CAPACITY | 105 gal | 397 L |
| COOLING SYSTEM FLUID CAPACITY | 10 gal | 38 L |
| HYDRAUILC SYSTEM FLUID CAPACITY | 20.8 gal | 80 L |
| REAR DIFF/FINAL DRIVE FLUID CAPACITY | 12.4 gal | 47 L |
| CIRCLE GEARBOX FLUID CAPACITY | 1.8 gal | 7 L |
| TANDEM CASE FLUID CAPACITY (EACH) | 16.9 gal | 64 L |
| Transmission | ||
| TYPE | direct drive, power shift | |
| NUMBER OF GEARS – FORWARD | 8 | |
| NUMBER OF GEARS – REVERSE | 6 | |
| MAX SPEED – FORWARD | 27.4 mph | 44 km/h |
| MAX SPEED – REVERSE | 21.6 mph | 34.7 km/h |
| Steering | ||
| ARTICULATION L/R | 20 degrees | |
| TURNING RADIUS | 24.6 ft in | 7.5 m |
| Front Axle | ||
| WHEEL LEAN | 18 degrees | |
| OSCILLATION – TOTAL | 32 degrees | |
| GROUND CLEARANCE | 2 ft in | 600 mm |
| Hydraulic System | ||
| PUMP TYPE | axial piston | |
| PUMP FLOW | 54.4 gal/min | 206 L/min |
| RELIEF VALVE PRESSURE | 3500 psi | 24150 kPa |
| Moldboard | ||
| MOLDBOARD WIDTH | 12 ft in | 3658 mm |
| MOLDBOARD HEIGHT | 24 in | 610 mm |
| MOLDBOARD THICKNESS | 0.87 in | 22 mm |
| MAX DEPTH OF CUT | 28.1 in | 715 mm |
| SIDE SHIFT LEFT | 20.6 in | 524 mm |
| SIDE SHIFT RIGHT | 26 in | 660 mm |
| BLADE PULL AT MAX WEIGHT | 42184 lb | 19135 kg |
| BLADE DOWN PRESSURE | 28697.6 lb | 13017 kg |
| Circle | ||
| DIAMETER | 60.2 in | 1530 mm |
| SHIFT LEFT | 27.4 in | 695 mm |
| SHIFT RIGHT | 28.7 in | 728 mm |
| MAX REACH OUTSIDE TIRES – LEFT | 74.6 in | 1896 mm |
| MAX REACH OUTSIDE TIRES – RIGHT | 77.9 in | 1978 mm |
| MAX LIFT ABOVE GROUND | 18.9 in | 480 mm |
| BLADE TIP ANGLE – FRONT | 40 degrees | |
| BLADE TIP ANGLE – REAR | 5 degrees | |
| Dimensions | ||
| HEIGHT TO TOP OF CAB | 10.3 ft in | 3131 mm |
| OVERALL LENGTH | 28.6 ft in | 8713 mm |
| WIDTH OVER TIRES | 8.1 ft in | 2464 mm |
| WHEELBASE | 20.2 ft in | 6169 mm |
| BLADE BASE | 8.4 ft in | 2561 mm |
| TANDEM AXLE WHEELBASE | 5 ft in | 1523 mm |
| REAR GROUND CLEARANCE | 1.1 ft in | 344 mm |
| FRONT GROUND CLEARANCE | 2 ft in | 600 mm |
Reviews
There are no reviews yet.